stollinstallationinstruction

STOLL MASONRY DOOR INSTALLATION INSTRUCTION

Installation of your glass fireplace enclosure is a relatively quick and simple operation.
The only tool you will need is a pair of pliers.

Step 1:
Remove doors from enclosure frame carefully so that finish does not get scratched.
-

Step 2:
Thread 1/4" nut onto 6" bolt all the way to head of bolt, then place washer onto bolt.
-

Step 3:
Thread "L" bracket onto 6" long bolt so that back side of "L" is against washer. (See Figure 1)
-

Step 4:
Thread 6" long bolt into nut which is welded on the back of enclosure frame. Use top nut for maximum height: bottom nut for minimum height.
-

Step 5:
Slide "L" bracket against lintel/brick; tighten 1/4" nut against "L" bracket. (See Figure 1)
-

Step 6:
Replace doors carefully. (If bottom mount is needed, eliminate step 6 and go on to steps 7-9).
-

Step 7:
Fasten bracket to bottom of enclosure frame as shown in figure 2 with 3/8" bolt with side A facing brick/stone.
-

Step 8:
With door frame in place and level, slide bracket against brick/stone and tighten bracket.
-

Step 9:
Replace doors carefully. Once doors are level and aligned, tighten pointed set screws to fireplace.
-

HOW TO ADJUST GLASS DOOR

Simply loosen 7/16" nut on back side of door hinges, adjust door and retighten nut.
To adjust door latch, loosen screws and slide latch from side to side, adjust latch and retighten screws