Walnut.jpg (355181 bytes)
Enhance the "country" or "rustic" look of your fireplace with a Log Style Mantel. Most fireplace mantels are made from thin pieces of wood assembled to look like a solid beam. Now a true solid wood  mantel is available. These mantels are sawed to emphasize the irregular shapes and natural character of wood.

Log Style Mantels are sawed 4" thick to offer a bold look above the fireplace. The narrowest pieces are about 7 inches wide and the widest can be as much as 12 inches or more. Often the natural shape of the log can cause the mantel to vary in width along its length. Because each log is different, the front face of each mantel is unique. Some will be smooth along the face, while others will have knots or character marks showing. It is common for a Log Style Mantel to have some splits on the top, bottom, or ends because of the shrinkage that occurs during the drying process. This does not affect the structural strength of the mantel and often adds to the character of the piece.

 

SPECIES OF WOOD USED:

  Three native hardwood  species have a natural advantage for making a  mantel. These woods are quite stable while drying which means they will have less cracking, shrinking and twisting than other species. Each wood offers its own unique character.
 

  • Basswood : Because it is both light in weight and light in color, Basswood will make a very interesting mantel. The wood grain is not very visible, but it does offer a variety of streaks and character marks.
  • Butternut: A medium brown wood with rich grain patterns, Butternut is also relatively light in weight and is quite popular as a mantel. It is often chosen by customers interested in the appearance of Oak because of its similar appearance.
  • Walnut: A dark brown wood popular for use in cabinets and furniture, Walnut makes a beautiful log mantel. Although somewhat heavier and harder than Basswood and Butternut, Walnut still works well for a mantel because of its stability.

Some mantels are also available from an imported species:
    -  Honduras Mahogany:  Some of the highest quality furniture uses Mahogany and now that same elegant wood can be used in a solid mantel. It has a rich dark red color.

 

STYLES-

   This refers to the front surface of the mantel which faces the room and is most visible. Five treatments are available.

 

Natural Face: On some logs the bark of the tree comes off during the sawing and drying process. The exposed bare edges will show the shape of the log along with knots and character marks. These mantels are the best value because no extra labor is required to prepare the mantel for sale. (Shown in Butternut).

Butternut Natural.JPG (132802 bytes)

 

 

 
Bark Face: Occasionally the bark adheres quite well to the mantel piece through the manufacturing process. These offer the most rustic look available. The bark cannot be guaranteed to stay on indefinitely without some tacks or glue, but customers who have installed these mantels for the past ten years report very few problems. Bark face mantels are more difficult to find than the other styles, so the inventory may have fewer of them available  (Shown in Basswood).
 

exbark.jpg (39499 bytes)
 
Square Face: This style combines the look of a solid wood mantel with a more traditional flat face. The face will show the same grain patterns that are seen on the top and bottom of the mantel (Shown in Walnut).
 

exsquare.jpg (41999 bytes)
 
Draw Knife Face:  If the face of a mantel is damaged in the manufacturing process we can sometimes smooth out the wood with a draw knife. The grain will normally show as in a Square Face mantel, but the mantel will retain the log edge look. The ends of a Draw Knife mantel will stay square (Shown in Basswood).
 

Basswood Draw Knife.JPG (89982 bytes)
 
Carved Face:  The front face and ends of these mantels are molded and shaped with carving tools to add depth and character to the final product. This carving will accentuate knots in the mantel face. Cracks that may develop in the drying process will also be softened (Shown in Walnut).
 

Walnut Carved.JPG (106076 bytes)
 
See our links above for "wood burned scenes" and "mounting brackets" for options to add to your Log Style Mantel
 
HOW THE MANTELS ARE MANUFACTURED:

After sawing mantels from the logs, they go through an extensive drying process.   We first air dry them in our yard and then put them through our dry kilns. This may take up to a year or more. Once dried  they are sorted by style. The 4" thickness is surface planed top and bottom to remove rough saw marks and to bring out the grains and character marks of the wood. This is also when the carving or wood burning designs are done. The mantels are not sanded, nor is a finish applied by us. These processes should be done at the time of installation to allow matching of other woodwork in the home.